Micromachined Flow Sensors in Biomedical Applications

Sergio Silvestri, Emiliano Schena

Micromachines · 2012 · 130 citations · 71 references

DOIFull text

Open access

Concepts

TL;DR

Micromachined devices are rapidly expanding, especially flow sensors for gas and liquid, thanks to advances in 3‑D micro‑fabrication and their low power, high accuracy, and small size. This review surveys biomedical applications of micromachined flow sensors, including blood flow, respiratory monitoring, and drug delivery. The paper details the measurement principles employed in early and contemporary studies of these sensors. It also reports observations on device characteristics and challenges.

Abstract

Application fields of micromachined devices are growing very rapidly due to the continuous improvement of three dimensional technologies of micro-fabrication. In particular, applications of micromachined sensors to monitor gas and liquid flows hold immense potential because of their valuable characteristics (e.g., low energy consumption, relatively good accuracy, the ability to measure very small flow, and small size). Moreover, the feedback provided by integrating microflow sensors to micro mass flow controllers is essential to deliver accurately set target small flows. This paper is a review of some application areas in the biomedical field of micromachined flow sensors, such as blood flow, respiratory monitoring, and drug delivery among others. Particular attention is dedicated to the description of the measurement principles utilized in early and current research. Finally, some observations about characteristics and issues of these devices are also reported.

References

71