Journal of Applied Physics · 2012 · 38 citations · 25 references
EngineeringMaterials EngineeringMaterials ScienceElectronic MaterialsSemiconductor DevicesSemiconductor MaterialsPhotovoltaic DevicesPhotovoltaic MaterialsSemiconductor InterfacesSemiconductor PhysicsSemiconductor SurfacesSolar CellsAmorphous SiliconCrystalline SiliconCrystalline Silicon Solar CellsHeterojunction Solar CellsHydrogenated Amorphous SiliconInterface PassivationSilicon Solar CellsSurface Passivation Layers
Thermal stability of passivating layers in amorphous/crystalline silicon (a-Si/c-Si) heterojunction solar cells is crucial for industrial processing and long-term device stability. Hydrogenated amorphous silicon (a-Si:H) yields outstanding surface passivation as atomic hydrogen saturates silicon dangling bonds at the a-Si/c-Si interface. Yet, a-Si surface passivation typically starts to degrade already at annealing temperatures in the range of 200 to 250 °C depending on annealing time, and optical absorption in front layers of a-Si reduces the short circuit current density. We show that oxygen incorporation into a-Si:H films enhances the thermal stability of the passivation and reduces parasitic absorption. We further show that for good passivation of the a-Si/c-Si interface, a compact material structure of the a-Si:O:H films is required where atomic hydrogen is the dominating type of diffusing hydrogen species. For plasma deposited a-Si:O:H films, oxygen incorporation of up to 10 at. % leads to an increase of the optical band gap while the hydrogen concentration is almost constant at approximately 10 at. %. For oxygen concentrations below 3%, the films yield surface recombination velocities as low as 10 cm/s on p-type wafers, and the temperature stability improves by about 50 K compared to pure a-Si:H. For films with relatively low oxygen content, hydrogen effusion spectra and Fourier transform infrared spectroscopy (FTIR) indicate a compact microstructure where only atomic H diffuses. For oxygen concentrations above 3%, the passivation quality reduces and H effusion and FTIR suggest the formation of an open, void-rich material where molecular H2 diffuses. In this case, annealing above 400 °C results in improved interface passivation, presumably due to a densification of the material. Likely, this densification results in an increased density of atomic H, which saturates Si dangling bonds near the c-Si interface.
25
Vibrational Spectra of Hydrogen in Silicon and Germanium
M. Cardona · physica status solidi (b) · 1983 · 533 citations