Applied Physics Letters · 2009 · 22 citations · 12 references
EngineeringMaterials EngineeringMaterials ScienceElectronic MaterialsMaterials PhysicsNanotechnologyMetal-semiconductor ContactsNanostructured Electronic MaterialsSemiconductor Device MaterialsSemiconductor InterfacesSemiconductor PhysicsSemiconductor SurfacesAtomic Force Microscopy AnalysisConductive Atomic Force MicroscopyContact ResistanceCurrent Density DistributionOhmic ContactsSilicide ContactsSilicon Carbide (Sic) MaterialsTransmission Line Modeling
We report on the evolution of the electrical and structural properties of Ni/3C-SiC contacts during annealing in the temperature range of 600–950 °C. A structural analysis showed the formation of different nickel silicide phases upon annealing. A combination of transmission line model and conductive atomic force microscopy measurements demonstrated a correlation between the macroscale specific contact resistance and the nanoscale resistance, measured locally across the sample. These results further revealed that the structural evolution is accompanied by an increased uniformity of the local current distribution, indicating that an increase of the effective contact area contributes to the improvement of the contact properties.
12
Ohmic contact formation mechanism of Ni on n-type 4H–SiC
Sang Youn Han, Ki-Hong Kim, Jong Kyu Kim et al. · Applied Physics Letters · 2001 · 156 citations
Fabrication and Characterization of 3C‐SiC‐Based MOSFETs
Adolf Schöner, M. Krieger, Gerhard Pensl et al. · Chemical Vapor Deposition · 2006 · 105 citations