Tapping-Mode AFM in Comparison to Contact-Mode AFM as a Tool for in Situ Investigations of Surface Reactions with Reference to Glass Corrosion

Ingo Schmitz, Manfred Schreiner, Gernot Friedbacher, M. Grasserbauer

Analytical Chemistry · 1997 · 59 citations · 12 references

Concepts

Abstract

A critical comparison between atomic force microscopy operated in both contact mode (CM-AFM) and tapping mode (TM-AFM) is presented by means of imaging surface reactions in situ. Corrosion phenomena of potash−lime−silica glass were studied under the ambient atmosphere, dry nitrogen, and nitrogen with a relative humidity of 50%, as well as under liquids by both techniques. The results show that surface reactions on sensitive samples can be imaged in situ without the need of UHV conditions. Furthermore, the initial stages of the corrosion process could be identified as an attack of humidity. The formation of swelled glass was observed. In the presence of corrosive gases from the ambient atmosphere, the formation of secondary corrosion products took place. During the in situ investigations, both CM-AFM and TM-AFM measurements influence the corrosion phenomena observed as well as the corrosion process. CM-AFM introduces relatively high lateral forces leading to plastic deformations of soft domains whereas TM-AFM activates surface processes by the oscillating tip transferring energy to the sample surface. These artifacts introduced by the different techniques are discussed critically.

References

12