Journal of Micromechanics and Microengineering · 2014 · 20 citations · 37 references
EngineeringMaterials EngineeringMaterials ScienceElectronic MaterialsSemiconductor DevicesSurface ScienceEtching ProcessesMask DesignMask FabricationThin Film EtchingAnisotropic EtchingContour Plot AnalysisEtch MechanismsEtch RateSiliconUndercut FormationUndercutting ProcessesWet Etching
In wet anisotropic etching, the etched profile of undercut convex corners depends on the type of etchant. A considerable amount of research has been carried out to explain this convex corner undercutting and to identify the orientation of undercut planes. However, it is not clearly understood why differently shaped undercut fronts appear with different etchants. Moreover, there has been no descriptive explanation regarding the distinct shape of the undercut convex corner in both KOH and TMAH. In this work, corner undercutting on the surface of a Si{100} wafer is thoroughly investigated. The undercutting behavior is examined for two different kinds of etchants (KOH and TMAH). The study is performed by analyzing the etching characteristics of different kinds of convex corners on the mask patterns. One type of corner in the mask design is formed by <110 > directions, while other types are formed by the intersection of different directions, which shapes the undercut convex corner profile. Furthermore, the appearance of etchant-dependent beveled directions at convex corners is clearly explained using the contour plot of the etch-rate data of a silicon hemisphere.
37
Anisotropic etching of silicon in TMAH solutions
Osamu Tabata, Ryouji Asahi, Hirofumi Funabashi et al. · Sensors and Actuators A Physical · 1992 · 458 citations
Masayoshi Esashi · 1998 · 230 citations