Applied Physics Letters · 2007 · 21 citations · 11 references
EngineeringMaterials EngineeringMaterials ScienceMaterials PhysicsSemiconductor MaterialsThin FilmsCarrier TransportSemiconductor HeterostructuresSemiconductor InterfacesSemiconductor PhysicsSemiconductor Thin FilmsSilicon MaterialsConductivity In Thin FilmsJunction ResistanceMagnetic PropertiesMagnetoresistanceNative Oxide LayersSiliconSilicon DioxideThin Oxide Films
Electrical and magnetic transport properties of FeSi–SiO2–Si junctions fabricated by depositing FeSi thin films on silicon substrates with the native oxide layer have been investigated. Near room temperature the carriers tunneled across the interface to the substrate with low resistance. With a decreasing temperature, the junction resistance increased more than three orders of magnitude near 270K, which switched the current path to the film. The transition characteristics depend on the conductivity of the silicon substrate. A positive magnetoresistance that peaked near the transition temperature was observed. Similar behavior was seen for CoSi films while TiSi films did not show a transition in resistance.
11
Superconducting Y1Ba2Cu3O7−<i>x</i> films on Si
T. Venkatesan, E. W. Chase, X. D. Wu et al. · Applied Physics Letters · 1988 · 173 citations
The precipitation of Fe at the Si–SiO2 interface
J. Wong‐Leung, D. J. Eaglesham, J. Sapjeta et al. · Journal of Applied Physics · 1998 · 45 citations
Natural Sciences, Materials Engineering, Materials Science +17