Boron-Doped PECVD Silicon Oxides as Diffusion Sources for Simplified High-Efficiency Solar Cell Fabrication

Nadine Wehmeier, Hannes Wagner, Bianca Lim, N.-P. Harder, Pietro P. Altermatt

EU PVSEC · 2013 · 16 citations · 1 references

DOIFull text

Open access

Concepts

Abstract

We develop plasma-deposited boron-doped silicon oxide layers with multifunctional capabilities: Firstly, they are used as local diffusion sources for attaining low saturation current densities of J0 = 84 fA/cm2 at sheet resistances as low as 67 / and surface boron concentrations in the range of 4–71019 cm3, suitable for efficient metallization. Secondly, they act as diffusion barriers against other dopants. Therefore a co-diffusion process consisting of a boron drive-in and a phosphorus diffusion in a POCl3 furnace in only one high temperature step potentially allows to simplify the fabrication of high-efficiency n-type PERT cells. Process and device simulations indicate that a co-diffusion temperature near 900C and a co-diffusion time of about 20 minutes are optimum for reaching cell efficiencies near 21%.

References

1