Journal of Applied Physics · 2010 · 37 citations · 13 references
EngineeringElectrical EngineeringMaterials ScienceOptoelectronicsSemiconductor DevicesSemiconductor MaterialsEtching ProcessesLight-emitting DiodesNanoelectronicsOptoelectronic DevicesSemiconductor Device MaterialsSemiconductor NanomaterialsChemical EtchingEtchingFull Width At Half MaximumGallium Nitride Light-emitting DiodesLight-emitting DevicesPlanarizationPlanarization TechniquesQuantum Well Light-emitting Diodes
InGaN/GaN multiple quantum well-based light-emitting diode (LED) nanopillar arrays were fabricated using Ni self-assembled nanodots as etching mask. The Ni nanodots were fabricated with a density of 6×108–1.5×109 cm−2 and a dimension of 100–250 nm with varying Ni thickness and annealing duration time. Then LED nanopillar arrays with diameter of approximately 250 nm and height of 700 nm were fabricated by inductively coupled plasma etching. In comparison to the as-grown LED sample an enhancement by a factor of four of photoluminescence (PL) intensity is achieved for the nanopillars and a blueshift as well as a decrease in full width at half maximum of the PL peak are also observed. The method of additional chemical etching was used to remove the etching-induced damage. Then nano-LED devices were further completed using a planarization approach to deposit p-type electrode on the tips of nanopillars. The current-voltage curves of both nanopillars and planar LED devices are measured for comparison.
13
InGaN-Based Multi-Quantum-Well-Structure Laser Diodes
Shuji Nakamura, Masayuki Senoh, Shin‐ichi Nagahama et al. · Japanese Journal of Applied Physics · 1996 · 2.5K citations