Applied Physics Letters · 1998 · 30 citations · 13 references
EngineeringMaterials EngineeringMaterials ScienceOptoelectronicsSemiconductor DevicesSemiconductor MaterialsLaser DiodesLaser PhysicsLight-emitting DiodesOptical SourcesOptoelectronic DevicesSemiconductor LasersCatastrophic Optical DamageCurrent DensityDifferential Quantum EfficiencyDiode Laser Threshold CurrentFacet CoatingsLasersMaximum Power OutputMetal-organic Chemical Vapor Deposition
Al-free active-region diode lasers grown by low-pressure, metal-organic chemical vapor deposition and emitting at λ=805 nm have been optimized for high continuous wave output power. The 1-mm-long devices consisting of an InGaAsP/In0.5Ga0.5P/In0.5(Ga0.5Al0.5)0.5P laser structure have a threshold-current density, Jth, of 310 A/cm2 and relatively high values for the characteristic temperatures of the threshold current, T0 (135 K), and differential quantum efficiency, T1 (900 K). Lasers with 10%/90% coatings and a 100-μm-wide stripe provide a maximum cw output power of 6.1 W at a heatsink temperature of 10 °C. The devices fail due to catastrophic optical mirror damage (COMD), where the internal power density, P̄COMD, is 17.4 MW/cm2; that is, twice that for conventionally facet-coated, 810 nm emitting, AlGaAs active-region diode lasers.
13
High-power 0.8 mu m InGaAsP-GaAs SCH SQW lasers
D. Z. Garbuzov, N.Y. Antonishkis, A. D. Bondarev et al. · IEEE Journal of Quantum Electronics · 1991 · 155 citations