Self-developing UV photoresist using excimer laser exposure

Thomas F. Deutsch, M. W. Geis

Journal of Applied Physics · 1983 · 125 citations · 7 references

Concepts

TL;DR

Nitrocellulose has a low ablation threshold of 20 mJ cm⁻² at 193 nm, giving higher contrast than most conventional photoresists. The authors aim to develop a self‑developing photoresist based on nitrocellulose that can be patterned with pulsed excimer laser radiation. Patterning is achieved by pulsed excimer laser exposure, and a simple ablative‑development model predicts the etch rate. Adding a dopant improves processing stability without altering the optical development rate, the resist attains sub‑0.3 µm resolution, and its performance varies with laser wavelength.

Abstract

Nitrocellulose functions as a self-developing photoresist which can be patterned using pulsed excimer laser radiation. The material exhibits a threshold fluence for ablation of 20 mJ/cm2 at a wavelength of 193 nm; this threshold results in higher contrast than can be obtained with most conventional photoresists. The effect of varying the laser wavelength has been examined. A simple model of ablative development has been used to predict the etch rate. The processing stability of the resist has been increased without changing the optical development rate by the addition of a dopant. The resolution of the resist is better than 0.3 μm.

References

7