Production and Characterization of Films from Cotton Stalk Xylan

Emel I. Goksu, Mehlika Karamanlioglu, Levent Yılmaz, Ülkü Yilmazer

Journal of Agricultural and Food Chemistry · 2007 · 132 citations · 17 references

Concepts

TL;DR

The study aimed to produce composite films from cotton stalk xylan and evaluate their mechanical and physical properties. Xylan and lignin were extracted from cotton stalk cellulose by alkali treatment and ethanol washing, then films were cast from 8–14 % xylan solutions (retaining ~1 % lignin) and dried at 20 °C and 40 % RH. Pure xylan could not form films, but 8–14 % xylan with ~1 % lignin yielded continuous films whose elastic modulus and coating strength varied with concentration, WVTR decreased as xylan increased, and glycerol plasticization enhanced stretchability while lowering water solubility, confirming lignin’s film‑forming role.

Abstract

Composite film production based on cotton stalk xylan was studied, and the mechanical and physical properties of the films formed were investigated. Xylan and lignin were separated from cellulose by alkali extraction and, then, lignin was removed using ethanol washing. Self-supporting continuous films could not be produced using pure cotton stalk xylan. However, film formation was achieved using 8–14% (w/w) xylan without complete removal of lignin during xylan isolation. Keeping about 1% lignin in xylan (w/w) was determined to be sufficient for film formation. Films were produced by casting the film-forming solutions, followed by solvent evaporation in a temperature (20 °C) and relative humidity (40%) controlled environment. The elastic modulus and hypothetical coating strength of the films obtained by using 8% xylan were significantly different from the ones containing 10–14% xylan. The water vapor transfer rates (WVTR) decreased with increasing xylan concentration, which made the films thicker. The glycerol addition as an additional plasticizer resulting in more stretchable films having higher WVTR and lower water solubility values. As a result, film production was successfully achieved from xylan, which was extracted from an agricultural waste (cotton stalk), and the film-forming effect of lignin on pure xylan has been demonstrated.

References

17