Applied Physics Letters · 2004 · 83 citations · 14 references
EngineeringElectrical EngineeringMaterials ScienceElectronic MaterialsOptoelectronicsSemiconductor DevicesLight SourcesLight-emitting DiodesLuminescent MaterialsOptoelectronic DevicesSemiconductor Device MaterialsWide-bandgap Semiconductor DevicesCurrent CrowdingLight ExtractionLight-emitting DevicesPower DensityPower SaturationSaturationThermal ResistanceUltraviolet Light-emitting Diodes
AlGaN-based deep-ultraviolet light-emitting diode (LED) structures, which radiate light at 305 and 290nm, have been grown on sapphire substrates using an AlN epilayer template. The fabricated devices have a circular geometry to enhance current spreading and light extraction. Circular UV LEDs of different sizes have been characterized. It was found that smaller disk LEDs had higher saturation optical power densities but lower optical powers than the larger devices. This trade-off between power and power density is a result of a compromise between electrical and thermal resistance, as well as the current crowding effect (which is due to the low electrical conductivity of high aluminum composition n- and p-AlGaN layers). Disk UV LEDs should thus have a moderate size to best utilize both total optical power and power density. For 0.85mm×0.85mm interdigitated LEDs, a saturation optical power of 2.9mW (1.8mW) at 305nm (290nm) was also obtained under dc operation.
14
High-efficiency 269 nm emission deep ultraviolet light-emitting diodes
V. Adivarahan, Shuai Wu, Jianping Zhang et al. · Applied Physics Letters · 2004 · 117 citations
Band-edge photoluminescence of AlN epilayers
J. Li, K. B. Nam, M. L. Nakarmi et al. · Applied Physics Letters · 2002 · 104 citations