IEEE Control Systems · 2013 · 60 citations · 90 references
EngineeringMechatronics EngineeringMicroelectromechanical SystemsMicrofabricationNanotechnologyAtomic Force MicroscopyNanomechanicsScanning Probe MicroscopyHigh-speed Scanning Probe MicroscopyMechanical ResonanceMotion TrajectoryNanofabricationNanopositioningNanopositioning SystemsRepetitive ControlResonance
This article focuses on the design and control of nanopo-sitioning systems (nanoposi-tioners) that operate mostly in a repetitive fashion. In addition to accuracy, speed is also a crucial requirement for these systems. Multi-axis nanopositioners are critical in applications such as atomic force microscopy (AFM) [1], fiber optic alignment [2], micro- and nanoma-chining [3], [4], and nanometrology [5], [6]. More specifically, for video-rate scanning probe microscopy (SPM) and high-throughput probe-based nano-fabrication [7], the desired motion trajectory of the nanopositioner repeats from one operating cycle to the next and the motion should be as fast and accurate as possible. However, vibrations caused by mechanical resonance are a major factor limiting the speed. Typically, the bandwidth of these systems is limited by the first mode of vibration [8], [9].
90
Richard D. Piner, Jin Zhu, Feng Xu et al. · Science · 1999 · 3K citations
Natural Sciences, Materials Engineering, Materials Science +15
A survey of iterative learning control
Douglas A. Bristow, Marina Tharayil, Andrew G. Alleyne · IEEE Control Systems · 2006 · 2.9K citations
The internal model principle of control theory
Bruce A. Francis, W.M. Wonham · Automatica · 1976 · 2.8K citations