Journal of Vacuum Science & Technology B Microelectronics Processing and Phenomena · 1985 · 129 citations · 0 references
EngineeringMaterials EngineeringMaterials ScienceOptoelectronicsSemiconductor DevicesSemiconductor MaterialsDopingSemiconductor Device MaterialsSemiconductor HeterostructuresSemiconductor LasersSemiconductor PhysicsSemiconductor SurfacesComposition ControlHeterostructure DevicesHeterostructure LasersHeterostructure MaterialsHeterostructure OptoelectronicsIn-situ DopingLaser Materials
The growth of useful GaxIn1−xPyAs1−y by MBE is inhibited by the difficulty in maintaining precise control over the flux from condensed source As and P effusion ovens. The study reviews using P2 and As2 beams generated from PH3 and AsH3 cracking as an alternative approach and presents new data. The authors performed doping studies and grew injection laser structures. Accommodation coefficients for P2 and As2 on heated InP and GaAs were measured, flux composition was linked to epitaxial layer composition, and the resulting control enabled the fabrication of 1.5‑µm heterostructure lasers with 300‑K threshold currents of 1300–2400 A/cm², ridge waveguide devices achieving ~40 mA threshold and 36–45 % differential efficiency, and continuous‑wave operation up to 50 °C.
The growth of useful GaxIn1−xPyAs1−y by MBE is inhibited by the difficulty in maintaining precise control over the flux from condensed source As and P effusion ovens. The use of P2 and As2 beams generated from the cracking of PH3 and AsH3 as an alternative approach is reviewed and new data are presented. Accommodation coefficients were determined for P2 and As2 on heated InP and GaAs surfaces. The flux composition as a function of epitaxial layer composition was determined for the lattice-matching quaternary. Studies of doping were done and injection laser structures were grown. Although detailed studies of layer composition control were not done, the achievable control seems quite adequate for injection lasers. A variety of heterostructure lasers emitting at nominally 1.5 μm with broad area 300-K threshold-current densities from 1300 to 2400 A/cm2 were demonstrated. Ridge waveguide lasers fabricated from the same wafers had Ith of about 40 mA and differential efficiencies of 36%–45%. They lased cw to 50 °C.