Three-dimensional SU-8 structures by reversal UV imprint

Walter Hu, Bijun Yang, Cheng Peng, S. W. Pang

Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena · 2006 · 47 citations · 12 references

Concepts

Abstract

In this work, three-dimensional (3D) SU-8 micro- and nanostructures were fabricated using a reversal UV imprint process at low temperature and low pressure. The SU-8 polymer was coated on a patterned glass mold and then transferred onto various substrates by reversal UV imprint at a typical temperature of 50°C, pressure of 1MPa, and UV exposure of 1s. The lower temperature and pressure used compared to conventional thermal imprint shorten the imprint time and alleviate pattern distortion. A combination of silanes was used to generate a medium surface energy on the imprint molds to enable polymer spin coating and mold release after imprint. In addition, an O2 plasma was used for glass mold treatment to improve uniformity of silane coating and to increase substrate surface energy for better polymer adhesion. Using this technology, 100nm–1μm wide SU-8 gratings were fabricated on flat or patterned substrates with good fidelity. By repeating this process, multiple-level nanochannels, cavities, or air-bridging polymer structures with 400nm–10μm widths have been demonstrated. The surface energy of SU-8 was modified using an O2 plasma to promote layer adhesion for 3D stacking. This reversal UV imprint technology offers versatility and flexibility to stack polymer layers and multiple-level sealed fluidic channels.

References

12