IEEE Transactions on Neural Systems and Rehabilitation Engineering · 2022 · 11 citations · 24 references
MedicineBiomedical EngineeringRehabilitation MedicineActuatorsAssistive TechnologyProstheticsBody-powered ProsthesesMyoelectric ProsthesesProsthetic Control SystemsProsthetic DevicesProsthetic RehabilitationUpper-limb Prosthetics3D Printed ProsthesesMuscle ContractionMyoelectric ControlMyoelectric Prosthesis ControlPowered Prosthetic HandsProsthetic Arm SystemsProsthetic ArmsSkeletal Muscle Contraction
Forearm amputees can use body-powered hooks and myoelectric hands for their daily activities. The body-powered hooks are suitable for delicate manipulation. However, their appearance is not always preferred by amputees, and a harness to pull a control cable is not easy to wear. Although the myoelectric hands have a natural appearance similar to the human hand and can be intuitively controlled by a myoelectric control system, they are not easy to try out and are heavy. This paper reports on the Finch, a prosthetic arm with three opposing fingers controlled by a muscle bulge. The aim of developing the Finch is to realize a lightweight prosthetic arm that is easy to wear and use. Three opposing fingers are controlled according to the degree of muscle bulge measured with a muscle bulge sensor on the user's forearm caused by muscle contraction. A supporter socket, consisting of a resin socket frame and a fabric supporter, allows easy fitting. A simple design using a linear actuator and 3D-printed parts achieved light weight (330 g) and low cost. Six functional tests and user tests using Southampton Hand Assessment Procedure showed that the Finch had a practical function that could be used in daily activities.
24
Colin M. Light, P.H. Chappell, Peter Kyberd · Archives of Physical Medicine and Rehabilitation · 2002 · 430 citations