Advanced Electronic Materials · 2019 · 33 citations · 31 references
EngineeringMaterials EngineeringMaterials ScienceElectronic MaterialsSemiconductor DevicesSemiconductor MaterialsDielectricsSemiconductor Device MaterialsSemiconductor Thin FilmsThin Film Electrical PropertiesThin-film MaterialsThin-film TransistorsAnnealing EffectsDielectric ConstantElectrical PropertiesFlexible Thin-film TransistorsGlass TransitionGlass Transition TemperatureOxide DielectricsThin-film Dielectrics
Abstract Recent developments in inkjet printing have proven it a viable method for low‐cost and large‐area coating of oxide materials. The main drawback of this method is the common requirement of a post‐deposition annealing (PDA) of the printed layers at relatively high temperatures ( T > 200 °C). This sets a requirement for the substrate to have high glass transition temperature ( T g ). To reduce the PDA temperature, deep‐ultraviolet (DUV) annealing is proposed as an effective method. In this study, yttrium aluminum oxide (YAlO x ) dielectrics are realized for application in flexible electronic devices via inkjet printing and DUV annealing at a temperature of 150 °C. The effect of the Y concentration on the electrical properties of the dielectrics is investigated. An increase in the Y incorporation is found to increase the dielectric constant and decrease the leakage current of the dielectrics. Flexible indium gallium zinc oxide (IGZO) thin‐film transistors with 50 µm channel widths and 7 µm channel lengths employing printed YAlO x dielectrics are fabricated on polyimide substrates with a maximum processing temperature of 150 °C, yielding a maximum gate leakage current of 10 −13 A, a high I ON / I OFF ratio of 10 8 , and a field effect mobility of 4.3 cm 2 V −1 s −1 .
31
Flexible active-matrix electronic ink display
Y. Chen, Joanna Au, Peter T. Kazlas et al. · Nature · 2003 · 597 citations
Jin‐Seong Park, Tae-Woong Kim, Denis Stryakhilev et al. · Applied Physics Letters · 2009 · 475 citations