Sensors · 2018 · 50 citations · 28 references
EngineeringAerospace EngineeringRobotics EngineeringPropulsionRoboticsVehicle TestingPropulsion System PerformancePropulsion SystemsVehicle Dynamics TestingEmpirical Formula DeterminationExperimental Data CollectionPropulsion System AnalysisPropulsion System ModelingThrust CharacteristicsThrust ModelingThruster IdentificationThruster Response Modeling
The study proposes a comprehensive framework for developing the three‑degree‑of‑freedom model and response model of vector propulsion in an unmanned surface vehicle. The authors use the 7.02 m × 2.6 m USV “Lanxin” equipped with a single vector thruster, perform turning and zig‑zag field tests, estimate thruster thrust empirically, derive a three‑degree‑of‑freedom and response model, identify model parameters through system identification, and validate the models by comparing simulated and measured test data. The identified models accurately reproduce turning and zig‑zag test results, and the combined theoretical–experimental approach demonstrates the feasibility and correctness of the modeling and identification process.
This paper presents a complete scheme for research on the three degrees of freedom model and response model of the vector propulsion of an unmanned surface vehicle. The object of this paper is “Lanxin”, an unmanned surface vehicle (7.02 m × 2.6 m), which is equipped with a single vector propulsion device. First, the “Lanxin” unmanned surface vehicle and the related field experiments (turning test and zig-zag test) are introduced and experimental data are collected through various sensors. Then, the thrust of the vector thruster is estimated by the empirical formula method. Third, using the hypothesis and simplification, the three degrees of freedom model and the response model of USV are deduced and established, respectively. Fourth, the parameters of the models (three degrees of freedom model, response model and thruster servo model) are obtained by system identification, and we compare the simulated turning test and zig-zag test with the actual data to verify the accuracy of the identification results. Finally, the biggest advantage of this paper is that it combines theory with practice. Based on identified response model, simulation and practical course keeping experiments are carried out to further verify feasibility and correctness of modeling and identification.
28
On the steering qualities of ships
Kensaku Nomoto, Takahiro Taguchi, Keinosuke Honda et al. · International Shipbuilding Progress · 1957 · 335 citations
Roger Skjetne, Øyvind N. Smogeli, Thor I. Fossen · Modeling Identification and Control A Norwegian Research Bulletin · 2004 · 226 citations · Full text