Effect of Multiple-Step Annealing on the Formation of Semiconducting β-FeSi<sub>2</sub> and Metallic α-Fe<sub>2</sub>Si<sub>5</sub> on Si (100) by Ion Beam Synthesis

H. Katsumata, Yunosuke Makita, Hajime Shibata, Masataka Hasegawa Uekusa

Japanese Journal of Applied Physics · 1997 · 29 citations · 36 references

Concepts

Abstract

Polycrystalline semiconducting β- FeSi 2 layers on Si (100) have been formed by ion beam synthesis. Results from two different annealing processes, either two-step (2SA) annealing up to 900° C or three-step annealing (3SA) up to 1100° C, are discussed. β- FeSi 2 grown by 3SA has shown a typical direct band-gap energy ( E g dir ) of 0.88 eV and a high localized defect density ( N 0 ) of 1.0×10 18 cm -3 , the latter being due to crystallographic mismatches or relevant defects at grain boundaries introduced during the transformation process from β to α. On the contrary, β- FeSi 2 grown by 2 SA has shown a lower E g dir of 0.80 eV and a smaller N 0 of 1.7×10 17 cm -3 , the former arising from a deviation of the stoichiometric composition to the Si-rich side. Broad PL bands near 0.8 eV have been observed at 2 K from both 2SA and 3SA samples, and we assign these PL bands to optical radiative transitions intrinsic to β- FeSi 2 .

References

36