IEEE Transactions on Very Large Scale Integration (VLSI) Systems · 2009 · 18 citations · 24 references
EngineeringComputer EngineeringElectrical EngineeringComputer ArchitectureField-programmable Gate ArraysLow-power DesignFpga ArchitectureInterconnect DesignLow-power Fpga DesignPower OptimizationRoutingRouting ArchitectureField-programmable Gate Array Routing FabricsField-programmable Gate Arrays (Fpgas)Logic Density OptimizationLow-power RoutePower ConsumptionPower Consumption OptimizationRouting In Field-programmable Gate ArraysThree-dimensional Integrated Circuit Routing
This paper describes a new programmable routing fabric for field-programmable gate arrays (FPGAs). Our results show that an FPGA using this fabric can achieve 1.57 times lower dynamic power consumption and 1.35 times lower average net delays with only 9% reduction in logic density over a baseline island-style FPGA implemented in the same 65-nm CMOS technology. These improvements in power and delay are achieved by 1) using only short interconnect segments to reduce routed net lengths, and 2) reducing interconnect segment loading due to programming overhead relative to the baseline FPGA without compromising routability. The new routing fabric is also well-suited to monolithically stacked 3-D-IC implementation. It is shown that a 3-D-FPGA using this fabric can achieve a 3.3 times improvement in logic density, a 2.51 times improvement in delay, and a 2.93 times improvement in dynamic power consumption over the same baseline 2-D-FPGA.
24
Dynamic power consumption in Virtex™-II FPGA family
Li Shang, Alireza Kaviani, Kusuma Bathala · 2002 · 393 citations
Measuring the gap between FPGAs and ASICs
Ian Kuon, Jonathan Rose · 2006 · 319 citations
Engineering, Computer Engineering, Electrical Engineering +16
Architecture evaluation for power-efficient FPGAs
Fei Li, Deming Chen, Lei He et al. · 2003 · 170 citations
Engineering, Computer Engineering, Electrical Engineering +17