Thermal conductivity of doped polysilicon layers

Abstract

The thermal conductivities of doped polysilicon layers depend on grain size and on the concentration and type of dopant atoms. Previous studies showed that layer processing conditions strongly influence the thermal conductivity, but the effects of grain size and dopant concentration were not investigated in detail. The current study provides thermal conductivity measurements for low-pressure chemical-vapor deposition (LPCVD) polysilicon layers of thickness near 1 /spl mu/m doped with boron and phosphorus at concentrations between 2.0/spl times/10/sup 18/ cm/sup -3/ and 4.1/spl times/10/sup 19/ cm/sup -3/ for temperatures from 20 K to 320 K. The data show strongly reduced thermal conductivity values at all temperatures compared to similarly doped single-crystal silicon layers, which indicates that grain boundary scattering dominates the thermal resistance. A thermal conductivity model based on the Boltzmann transport equation reveals that phonon transmission through the grains is high, which accounts for the large phonon mean free paths at low temperatures. Algebraic expressions relating thermal conductivity to grain size and dopant concentration are provided for room temperature. The present results are important for the design of MEMS devices in which heat transfer in polysilicon is important.