Robust porous SiOCH/Cu interconnects with ultrathin sidewall protection liners

Abstract

Robust porous low-k/Cu interconnects have been developed for 65-nm-node ultralarge-scale integrations (ULSIs) with 180-nm/200-nm pitched lines and 100-nm diameter vias in a single damascene architecture. A porous plasma-enhanced chemical vapor deposition (PECVD)-SiOCH film (k=2.6) with subnanometer pores is introduced into the intermetal dielectrics on the interlayer dielectrics of a rigid PECVD-SiOCH film (k=2.9). This porous-on-rigid hybrid SiOCH structure achieves a 35% reduction in interline capacitance per grid in the 65-nm-node interconnect compared to that in a 90-nm-node interconnect with a fully rigid SiOCH. A via resistance of 9.7 /spl Omega/ was obtained in 100-nm diameter vias. Interconnect reliability, such as electromigration, and stress-induced voiding were retained with interface modification technologies. One of the key breakthroughs was a special liner technique to maintain dielectric reliability between the narrow-pitched lines. The porous surface on the trench-etched sidewall was covered with an ultrathin plasma-polymerized benzocyclobuten liner (k=2.7), thus enhancing interline time-dependent dielectric breakdown reliability. The introduction of a porous material and the control of the sidewall are essential for 65-nm-node and beyond scaled-down ULSIs to ensure high levels of reliability.