Research Journal of Applied Sciences Engineering and Technology · 2009 · 56 citations · 22 references
AgricultureAgronomyCrop SciencesCereal ScienceCrop PhysiologyCrop ProductionMoisture AnalysisMoisture DeterminationSoil Physical PropertiesWater ContentGrain Mass MeasurementMoisture ContentMoisture Content DependenceMoisture Content EffectsMoisture Content EvaluationPhysical PropertiesSurface AreaSurface Area Characterization
The moisture-dependent physical properties of agri cultural grains are important to design post harvest equipments of the product. In the current study, various physical properties of two different paddy cultivars were determined at fi ve moistur e content levels of 8, 11, 14, 18 and 21% (d.b.). In the case of Alikazemi cultivar, the average length, width, thickness, equivalent diameter, surface area, volume, sphericity, thousand grain mass and angle of repose increased from 9.83 to 10.05 mm, 2.65 to 2.76 mm, 1.92 to 2.01 mm, 3.72 to 3.85 mm, 39.37 to 42.12 mm 2 , 26.91 to 29.94 mm 3 , 37.51 to 38.04%, 27.63 to 31.20 g and 35.67o to 41.23o, respectively, as the moisture content increased from 8 to 21% (d.b.). The corresponding values increased from 10.20 to 10.25 mm, 2.31 to 2.40 mm, 1.85 to 1.92 mm, 3.53 to 3.63 mm, 36.87 to 38.61 mm 2 , 23.12 to 25.11 mm 3 , 34.53 to 35.27%, 24.43 to 27.80 g and 38.27o to 44.37o, respectively, for Hashemi cultivar. For Alikazemi cultivar, the static coefficient of friction of grains increased linearly against three various surfaces, namely, glass (0.3168-0.4369), galvanized iron sheet (0.4179-0.4965), and plywood (0.4394-0.5264) as the moisture content increased from 8 to 21% (d.b.). The corresponding value for Hashemi cultivar increased from 0.3577 to 0.4650, 0.4629 to 0.5082 and 0.4857 to 0.5452, respectively, against three mentioned surfaces.
22
Some Physical Properties of Hemp Seed
Ramazan Öztürk, Rahmi Keskin · Biosystems Engineering · 2003 · 300 citations
E. A. Baryeh · Journal of Food Engineering · 2002 · 261 citations
Natural Sciences, Materials Engineering, Materials Science +5