IEEE Photonics Technology Letters · 2008 · 117 citations · 17 references
EngineeringElectrical EngineeringMaterials ScienceElectronic MaterialsSemiconductor DevicesSemiconductor MaterialsLight SourcesLight-emitting DiodesLuminescent MaterialsSemiconductor Device MaterialsWide-bandgap Semiconductor DevicesWide-bandgap SemiconductorsChemical EtchingDevice FabricationGallium Nitride Light-emitting DiodesHeat DissipationLight-emitting DevicesSelective EtchingSeries ResistanceVertical Light-emitting Diodes
Vertical light-emitting diodes (LEDs) were successfully fabricated by a chemical lift-off process using a selectively etchable CrN buffer layer. The novel CrN metallic layer worked well as a buffer layer for growth of the GaN LED and was etched out clearly during selective chemical etching. The vertical LED by chemical lift-off showed very good current-voltage performance with low series resistance of 0.65 Omega and low operated voltage of 3.11 V at 350 mA. Also, this device could be operated at a much higher injection forward current (1118 mA at 3.70 V) by thermally conductive metal substrate which enabled the high current operation with excellent heat dissipation.
17
Optical Process for Liftoff of Group III-Nitride Films
M. K. Kelly, O. Ambacher, R. Dimitrov et al. · physica status solidi (a) · 1997 · 186 citations
Natural Sciences, Materials Engineering, Materials Science +14
Photonic crystal laser lift-off GaN light-emitting diodes
Aurélien David, Tetsuo Fujii, Brendan Moran et al. · Applied Physics Letters · 2006 · 124 citations · Full text