2003 · 10 citations · 20 references
EngineeringMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsMicroelectromechanical SystemsSurface EngineeringCoatingsMems ReliabilityMicrofabrication MaterialsSurface DegradationThin Film AdhesionWear-resistant MaterialsBimodal DistributionCoating Failure MechanismsMaterial Surface CoatingsMechanical ReliabilityPin Joint DesignPolysiliconSupercritical Carbon Dioxide ProcessingSurface Condition Effects
Accelerated stress experiments were performed on a class of pin joints to determine reliability. We varied parameters that affected the area of the rubbing surfaces and the gap between those surfaces. Most of the pin joints failed due to seizure. We observed bimodal failure distributions where the lower distribution was associated with an adhesion event with no observable wear debris. The upper distribution of failures was associated with agglomerations of wear debris, which may have seized the pin joint. The effect of surface coatings was also studied. We found that for supercritical carbon dioxide (SCCO/sub 2/) dried microengines; the largest effect was due to gap spacing. For microengines with a self-assembled monolayer coating (SAMS), we observed minimal difference in the lifetimes of failed devices.
20
Friction and wear of materials
Wear · 1965 · 3K citations
Friction and Wear of Materials
E. Rabinowicz, R. I. Tanner · Journal of Applied Mechanics · 1966 · 1.5K citations · Full text
Surface micromachined microengine
Ernest J. Garcia, Jeffry J. Sniegowski · Sensors and Actuators A Physical · 1995 · 189 citations