A 47$\,\times\,$10 Gb/s 1.4 mW/Gb/s Parallel Interface in 45 nm CMOS

Abstract

A 47 × 10 Gb/s chip-to-chip interface consuming 660 mW is demonstrated in 45 nm CMOS. The circuitry and interconnect are co-designed to minimize power and area for a wide parallel interface. Power is reduced by amortizing clocking, minimizing the span of clock signals and pairing a low-swing transmitter driver with a sensitive receiver sampler. The active silicon area is compressed by 64% relative to the C4 bumps using on-chip transmission line routing. A dense, top-side package connector and bridge enable both high off-chip interconnect density and low overall power by reducing equalization and deskew requirements. The interface also demonstrates fast power management for the I/O circuits. The receiver power can be reduced by 93% during standby and an integrated wake-up timer indicates that all lanes return reliably to active mode in <;5 ns. The interface operates at 470 Gb/s with an aggregate bit error ratio better than 2 ×10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">-18</sup> while consuming 1.4 mW/Gb/s and occupies 3.2 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> active silicon area.