IEEE Transactions on Consumer Electronics · 2005 · 56 citations · 5 references
EngineeringComputer EngineeringElectrical EngineeringDigital CommunicationLow-power DesignMicroelectronicsDigital Signal ProcessingDynamic Power ReductionLow-power Digital Circuit DesignPower ManagementPower OptimizationTiming AnalysisDemodulationDynamic Power DissipationFast Fourier TransformFourier TransformHigh-speed Cmos DesignOrthogonal Frequency-division MultiplexingPower Consumption OptimizationThroughput Improvement
We present a novel implementation for 2K/8K dual-mode FFT (fast Fourier transform) for OFDM (orthogonal frequency division multiplexing) of DVB-T (digital video broadcasting terrestrial) receivers. Besides pipelining the FFT to reduce the area and enhance the data throughput, SDF (single-path delay feedback) butterfly units for radix-2 and radix-4 processing are adopted to resolve the power consumption difficulty and the P&R (place and route) problem. The SRAM is used in the butterfly units to relax the auto-refreshing requirement if DRAM is used such that not only is the dynamic power saved, the timing control is also less stingy. The 2K/8K FFT comprises 5/6 cascaded stages of radix-4 and one stage of radix-2 butterfly units. The proposed design is carried out by 0.35 /spl mu/m 2P4M CMOS process to verify the high processing 8 MHz rate with power dissipation as low as 535 mW at a 16 MHz system clock.
5
A new VLSI-oriented FFT algorithm and implementation
Lihong Jia, Yonghong Gao, Jouni Isoaho et al. · 2002 · 107 citations
Engineering, Computer Engineering, Electrical Engineering +17