IEEE Electron Device Letters · 2012 · 16 citations · 7 references
EngineeringElectrical EngineeringMicroelectronicsMicrowave EngineeringWireless CommunicationsCmos Circuit DesignComplementary Metal-oxide-semiconductor TechnologyCoupled CircuitsDirectional CouplersIntegrated Circuit DesignRadio-frequency Integrated CircuitsCmos Radio-frequency CircuitsCoil DesignInsertion LossInsertion Loss ReductionIsolationParasitic CouplingRf Cmos DesignTransceiver Architectures
This letter proposes a miniature CMOS stacked spiral-coupled (SSC) directional coupler for a fully integrated CMOS transceiver to isolate the large transmit power from the transmitter to the receiver. It consists of two 90 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">°</sup> -rotated center-aligned SSC coils. The path center of one coil is aligned to the gap center of the other coil. The grounded secondary coil plays a role of ground shielding for reducing the insertion loss. Two capacitors are utilized for tuning the center frequency and isolation level. Fabricated in a standard CMOS process, it achieves an isolation of -67 dB, an insertion loss of -0.8 dB, and a coupling of -16.1 dB and only occupies 0.3×0.3 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> of silicon area. To the authors' knowledge, this is the first CMOS directional coupler at the UHF band, with the smallest form factor when compared with other implementations of directional couplers.
7
A Passive Circulator with High Isolation using a Directional Coupler for RFID
Wankyu Kim, Moon‐Que Lee, Jin‐Hyun Kim et al. · 2006 · 60 citations