Review of Scientific Instruments · 2010 · 25 citations · 7 references
Natural SciencesMaterials EngineeringMaterials ScienceElectronic MaterialsPlasma PhysicsSemiconductor DevicesHigh-temperature PlasmasMagnetized PlasmaPlasma HeatingPlasma SourcesBendingIon Source PhysicsIon SourcesMagnetron SputteringSelf-sputteringSputtering ProcessesSurface Temperature
An ion source based on a planar magnetron sputtering device with thermally isolated target has been designed and demonstrated. For a boron sputtering target, high target temperature is required because boron has low electrical conductivity at room temperature, increasing with temperature. The target is well-insulated thermally and can be heated by an initial low-current, high-voltage discharge mode. A discharge power of 16 W was adequate to attain the required surface temperature (400 degrees C), followed by transition of the discharge to a high-current, low-voltage mode for which the magnetron enters a self-sputtering operational mode. Beam analysis was performed with a time-of-flight system; the maximum boron ion fraction in the beam is greater than 99%, and the mean boron ion fraction, time-integrated over the whole pulse length, is about 95%. We have plans to make the ion source steady state and test with a bending magnet. This kind of boron ion source could be competitive to conventional boron ion sources that utilize compounds such as BF(3), and could be useful for semiconductor industry application.
7
Improved time-of-flight ion charge state diagnostic
I.G. Brown, James E. Galvin, R.A. MacGill et al. · Review of Scientific Instruments · 1987 · 138 citations