Applied Physics Letters · 2005 · 331 citations · 4 references
Natural SciencesMaterials EngineeringMaterials ScienceElectronic MaterialsSemiconductor MaterialsThin FilmsChemical Vapor DepositionSemiconductor Device MaterialsSemiconductor Thin FilmsThin Film Electrical PropertiesThin-film MaterialsMetalorganic Chemical Vapor DepositionOxide Memristive MaterialsPower RequiredResistive SwitchingSemiconductor Oxide Thin FilmsStep WidthSwitching DevicesThin Oxide Films
Electric-pulse-induced resistive switching of 43nm thick TiO2 thin films grown by metalorganic chemical vapor deposition was studied by current-voltage (I-V) and constant voltage-time measurements. The resistance ratio between the two stable states of the film constitutes approximately 1000. The allowed current level and voltage step width during the sweep mode I-V measurements influenced switching parameters, such as the switching voltage, time before switching, and resistance values. However, it was clearly observed that the power imparted to the film controlled mainly switching. The required power for successful switching was almost invariant irrespective of other measurement variables.
4
Current switching of resistive states in magnetoresistive manganites
A. Asamitsu, Y. Tomioka, H. Kuwahara et al. · Nature · 1997 · 1.1K citations · Full text
Reproducible resistance switching in polycrystalline NiO films
Sunae Seo, Myoung‐Jae Lee, David H. Seo et al. · Applied Physics Letters · 2004 · 934 citations
Natural Sciences, Materials Engineering, Materials Science +16