Journal of Vacuum Science & Technology B Nanotechnology and Microelectronics Materials Processing Measurement and Phenomena · 2010 · 27 citations · 13 references
EngineeringElectrical EngineeringManufacturing EngineeringOptoelectronicsPhotonicsSemiconductor DevicesIntegrated Circuit FabricationMask FabricationBlue Laser DiodesInterference LithographyOptical LithographyPhase DistortionSemiconductor Laser DiodesSpatial CoherenceSpatial Filter DesignSubstrate Design
Interference lithography (IL) has proven itself to be an enabling technology for nanofabrication. Within IL, issues of spatial phase distortion, fringe stability, and substrate development have been explored and addressed. However, IL tools are still unnecessarily expensive, large, and complex. To address these issues, the authors previously built a simple IL tool that used a blue laser diode to produce ∼300 nm pitch structures. The resulting patterned areas (∼mm2) were limited by both the temporal and spatial coherence of the laser. Here, the authors report on the advancement of their low-cost interference lithography tool that makes use of newly available blue laser diodes and a simplified spatial filter to print larger-area (∼cm2) patterns. With this configuration, the authors have designed and implemented a small-footprint (∼0.2 m2) Lloyd’s mirror IL tool that can be assembled for less than ∼6000 USD.
13
Using diode lasers for atomic physics
Carl Wieman, L. Hollberg · Review of Scientific Instruments · 1991 · 798 citations
Optically matched trilevel resist process for nanostructure fabrication
Mark L. Schattenburg, Richard Aucoin, Robert C. Fleming · Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena · 1995 · 85 citations
Natural Sciences, Materials Engineering, Materials Science +15