Growth and Morphology of Sputtered Aluminum Thin Films on P3HT Surfaces

Gunar Kaune, Ezzeldin Metwalli, Robert J. Meier, Volker Körstgens, Kai Schlage, Sébastien Couet, Ralf Röhlsberger, Stephan V. Roth, Peter Müller‐Buschbaum

ACS Applied Materials & Interfaces · 2011 · 47 citations · 58 references

Concepts

Abstract

Growth and morphology of an aluminum (Al) contact on a poly(3-hexylthiophene) (P3HT) thin film are investigated with X-ray methods and related to the interactions at the Al:P3HT interface. Grazing incidence small-angle scattering (GISAXS) is applied in situ during Al sputter deposition to monitor the growth of the layer. A growth mode is found, in which the polymer surface is wetted and rapidly covered with a continuous layer. This growth type results in a homogeneous film without voids and is explained by the strong chemical interaction between Al and P3HT, which suppresses the formation of three-dimensional cluster structures. A corresponding three stage growth model (surface bonding, agglomeration, and layer growth) is derived. X-ray reflectivity shows the penetration of Al atoms into the P3HT film during deposition and the presence of a 2 nm thick intermixing layer at the Al:P3HT interface.

References

58