IEEE Electron Device Letters · 2012 · 92 citations · 15 references
EngineeringElectrical EngineeringMaterials ScienceMicroelectronicsSemiconductor DevicesSemiconductor MaterialsBipolar Junction TransistorsIntegrated Circuit DesignMemory DevicesSemiconductor Crystal GrowthSemiconductor Device MaterialsSemiconductor HeterostructuresCurrent DensityMemory Circuit DesignMemristive MemoryN-type DopingNon-volatile Memory Design
We propose an epitaxial punchthrough diode for bipolar resistance RAM (RRAM) selector application. Epitaxial Si:C process is used to deposit n <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">+</sup> /p/n <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">+</sup> layers which are fabricated into 300-nm-diameter vertical punchthrough diodes. High on-current density of >; 1 MA/cm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> and high on/off current ratio of >; 250 and >; 4700 (at opposite polarities) are observed. A switching speed of <; 10 ns is measured. On-voltage designability is demonstrated by tuning the p-region doping and length. The comparison of experimental IV with Sentaurus TCAD-simulated IV characteristics confirms the punchthrough mechanism. Comparison with other bipolar RRAM selector technologies highlights the overall advantages of punchthrough-based selector.
15