Journal of Applied Physics · 1990 · 22 citations · 15 references
Natural SciencesMaterials EngineeringMaterials ScienceMetallic MaterialsMetallurgyThin FilmsAlloysFerromagnetic MaterialsMetal MaterialsMetalsThin-film MaterialsX-ray DiffractionEpitaxial Film GrowthNitride Thin FilmsReactive SputteringSputter DepositionSputteringSputtering ProcessesSputtering TechniquesX-ray Diffraction Analysis
Using controlled N2/Ar sputtering gas mixtures, rf-sputtered films were prepared from Fe, Ni, and Ni81Fe19 targets, and their structure and orientation were studied by x-ray diffraction. When no N2 was introduced during sputtering, all the films were oriented in the highest density planes; i.e., in (110), (111), and (111) for α-Fe, Ni, and γ-Ni81Fe19, respectively. With increasing N2 introduction, however, the orientation shifted to lower density planes, and eventually nitrides were formed. Multilayer films of metal and nitride were prepared with the Ni81Fe19 target by repetitive supply of N2 for short periods during sputtering. Strong orientation effects were observed depending on the number of layers grown. In addition, the x-ray diffraction of these films presented evidence of epitaxial growth of the nitrides (Ni,Fe)4N on the alloy layers.
15
The Fe-N (Iron-Nitrogen) system
H. A. Wriedt, N. A. Gokcen, R. H. Nafziger · Bulletin of Alloy Phase Diagrams · 1987 · 350 citations
Synthesis of iron-nitride films by means of ion beam deposition
Norio Terada, Y. Hoshi, M. Naoe et al. · IEEE Transactions on Magnetics · 1984 · 134 citations
Natural Sciences, Materials Engineering, Materials Science +17