Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · 2010 · 37 citations · 9 references
Aluminium NitrideEngineeringZinc OxideThin Film Process TechnologyChemical DepositionDc Magnetron SputteringIon ImplantationIon EmissionThin Film ProcessingMaterials ScienceElectrostatic Energy AnalyzerElectrical EngineeringOxide ElectronicsSputtering ProcessAl-doped Zno FilmsElectrochemistrySurface ScienceApplied PhysicsNegative IonsThin Films
The origin of high energy negative ions during deposition of aluminum doped zinc oxide (AZO) films by dc magnetron sputtering of an AZO (Al2O3: 2.0 wt %) target was investigated by in situ analyses using the quadrupole mass spectrometer combined with the electrostatic energy analyzer. High energy negative oxygen (O−) ions which possessed the kinetic energy corresponding to the cathode sheath voltage were detected. The maximum flux of the O− ions was clearly observed at the location opposite to the erosion track area on the target. The flux of the O− ions changed hardly with increasing O2 flow ratio [O2/(Ar+O2)] from 0% to 5%. The kinetic energy of the O− ions decreased with decreasing cathode sheath voltage from 403 to 337 V due to the enhancement of the vertical maximum magnetic field strength at the cathode surface from 0.025 to 0.100 T. The AZO films deposited with the lower O− bombardment energy showed the higher crystallinity and improved the electrical conductivity.
9
Comparative material study on RF and DC magnetron sputtered ZnO:Al films
O. Kluth, G. Schöpe, B. Rech et al. · Thin Solid Films · 2005 · 122 citations