Journal of Texture Studies · 1980 · 152 citations · 20 references
NutritionEngineeringBotanyMechanical EngineeringAgricultural EconomicsRipeningShear Strain RateMechanicsStressstrain AnalysisTorsion TestHealth SciencesShear StressSolid MechanicsMaterial MechanicsFood QualityFood SafetyMechanical PropertiesFood EngineeringMechanics Of MaterialsHigh Strain Rate
ABSTRACT A torsion test was developed for studying the structural failure of selected raw fruits and vegetables. Apple, melon and raw potato flesh were tested at a shear strain rate of approximately 0.26s ‐1 in torsion and uniaxial compression. Low strain modulus values were determined in addition to shear stresses and normal strains at failure. Results corroborated the maximum normal strain failure criterion proposed by Segerlind and Dal Fabbro (1978) for apples and suggested its application to potatoes and melons if true strains are used rather than engineering strains. The maximum shear stress theory also seemed to be a possible failure criterion for potatoes. Results comparing compressible and incompressible materials suggest that bulk strain affects the shear stress at failure. The observed failure planes supported the quantitative results for stresses at failure. Scanning electron micrographs indicated that the cellular failure occurred in the cell wall, regardless of whether it was due to tension, Varying specimen lengths or diameters had negligible effects on the uniaxial compression modulus but did affect the shear stress at failure in a manner yet to be satisfactorily explained.
20
Journal of the Franklin Institute · 1962 · 4.4K citations
Handbook of experimental stress analysis
E.W. Hammer · Journal of the Franklin Institute · 1950 · 282 citations
BRUISING AND ENERGY DISSIPATION IN APPLES
J.E. Holt, D. Schoorl · Journal of Texture Studies · 1977 · 138 citations