Journal of The Electrochemical Society · 2003 · 22 citations · 20 references
Natural SciencesMaterials EngineeringMaterials ScienceElectronic MaterialsSemiconductor MaterialsThin FilmsAluminum OxidesDefects In Electronic MaterialsDopingOxide SemiconductorsSemiconductor DefectsThin Film AnnealingAluminum-doped Zinc OxideAnnealing EffectsAnnealing Temperature EffectsPassivationPassivation BehaviorRapid Thermal AnnealingSemiconductor Oxide Thin FilmsThin Oxide Films
Al-doped zinc oxide (AZO) thin films have been grown on (0001) substrate by radio-frequency (rf) magnetron sputtering at 550°C. The AZO films have been annealed by a rapid thermal process in exposure with a temperature range of 600-1000°C. Effects of hydrogen on the AZO films have been investigated using photoluminescence (PL), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). The as-grown AZO film shows only broad deep defect-level PL. After annealing at 600°C, deep defect-level emission is quenched and near-band-edge (NBE) emission is observed at around 382 nm (3.2 eV), which can be explained by the passivation effect. At elevated temperature, two interesting peaks corresponding to violet (406 nm, 3.05 eV) and blue (436 nm, 2.84 eV) emissions have been observed for the first time in annealed AZO thin films. Incorporation of hydrogen and formation of oxygen deficient in annealed AZO films have been studied using XPS. Surface morphology and microstructure of AZO films have been carried out by SEM. © 2003 The Electrochemical Society. All rights reserved.
20
Optically pumped lasing of ZnO at room temperature
Darren M. Bagnall, Y. F. Chen, Z. Q. Zhu et al. · Applied Physics Letters · 1997 · 2.2K citations