Measurement Science and Technology · 2012 · 54 citations · 17 references
EngineeringPhysicsMaterials CharacterizationMetrologyOpticsCalibrationDeflection Of BeamsForm MeasurementOptical MetrologyPhysical OpticsSensor CalibrationAlignment Measurement SystemsFlatness MeasurementOptical Profilometry
Recently, two new scanning deflectometric flatness reference (DFR) measurement systems were installed at the Physikalisch-Technische Bundesanstalt. These instruments are aimed at measurements of the absolute flatness of optical surfaces with sub-nanometre uncertainties. System 1 is mainly designed for horizontal specimens with sizes up to 1 m and weights up to 120 kg. The other setup, i.e. system 2, is designed for vertical specimens. The two DFR systems use three different deflectometric procedures, which are based on scanning a pentaprism or the so-called double mirror unit (DMU) across the specimen. These 90° beam deflectors eliminate—to a great extent—residual guidance errors of the scanning stages, which is required to attain topography measurements with sub-nanometre uncertainty. The setups of the two new systems, the principles of the three different measurement modes, the alignment procedures, simulation results and first measurements are presented.
17
Precise Measurement of Planeness
G. V. Schulz, Johannes Schwider · Applied Optics · 1967 · 145 citations
Engineering, Physics, Metrology +14
Calibration of high-resolution electronic autocollimators against an angle comparator
A. Just, Michael Krause, R. Probst et al. · Metrologia · 2003 · 125 citations
R. Probst, Reiner Wittekopf, Michael Krause et al. · Measurement Science and Technology · 1998 · 116 citations
Solution to the shearing problem
Clemens Elster, I. Weingärtner · Applied Optics · 1999 · 108 citations
Natural Sciences, Biomedical Engineering, Biomedical Optics +10