An introduction to inertial navigation

Until recently the weight and size of inertial sensors has prohibited their use in domains such as human motion capture. Recent improvements in the performance of small and lightweight micromachined electromechanical systems (MEMS) inertial sensors have made the application of inertial techniques to such problems possible. This has resulted in an increased interest in the topic of inertial navigation, however current introductions to the subject fail to sufficiently describe the error characteristics of inertial systems. We introduce inertial navigation, focusing on strapdown systems based on MEMS devices. A combination of measurement and simulation is used to explore the error characteristics of such systems. For a simple inertial navigation system (INS) based on the Xsens Mtx inertial measurement unit (IMU), we show that the average error in position grows to over 150 m after 60 seconds of operation. The propagation of orientation errors caused by noise perturbing gyroscope signals is identified as the critical cause of such drift. By simulation we examine the significance of individual noise processes perturbing the gyroscope signals, identifying white noise as the process which contributes most to the overall drift of the system. Sensor fusion and domain specific constraints can be used to reduce drift in INSs. For an example INS we show that sensor fusion using magnetometers can reduce the average error in position obtained by the system after 60 seconds from over 150 m to around 5 m. We conclude that whilst MEMS IMU technology is rapidly improving, it is not yet possible to build a MEMS based INS which gives sub-meter position accuracy for more than one minute of operation.