Energy Procedia · 2013 · 29 citations · 22 references
EngineeringMaterials EngineeringMaterials ScienceElectronic MaterialsSemiconductor DevicesSemiconductor MaterialsElectroless PlatingPhotovoltaic DevicesSemiconductor Device MaterialsSemiconductor Thin FilmsSolar Cell MaterialsSolar CellsDevice FabricationElectroless DepositionPlatingSeed Layer DepositionSeed Layer FormationSeed LayersSilicon Solar CellsSolar Cell Fabrication
This paper describes a galvanic deposition method for the formation of uniformly thin nickel seed layers for silicon solar cells. Unlike the previously-reported electroless and light-induced plating methods, where the thickness of nickel seed layers can be vary significantly due to non-uniform nucleation of metal which can be exacerbated by variations in surface dopant concentrations and roughness, this method saturates resulting in Ni seed layers of uniform thicknesses in the range of 250-400 nm depending on the plating time and patterning process. The method was successfully used in the fabrication of nickel/copper plated homogeneous 100 Ω/□ emitter Si solar cells and laser-doped selective emitter (LDSE) cells, both with screen-printed, Al-alloyed back surface fields. Average cell efficiencies of 18.4% and 18.9% were achieved for the homogeneous emitter cells and LDSE cells, respectively, with the best LDSE cell having an efficiency of 19.2%.
22
The 27th European Photovoltaic Solar Energy Conference
Syed Ghufran Hashmi, Kati Miettunen, Antti Ruuskanen et al. · 2012 · 626 citations