Optics Express · 2025 · 13 citations · 23 references
Natural SciencesMaterials EngineeringMaterials ScienceElectronic MaterialsOpticsPhotonicsIntegrated OpticsLaser Material ProcessingLaser OpticsLaser Surface ProcessingMachiningRaman SpectroscopyBrittle DamageFocusInterface MorphologyLaser Kerf CompensationLaser MicromachiningPattern UniformitySurface Roughness ParametersWafer Dicing
Picosecond laser processing has emerged as a key technique for SiC wafer slicing, while it faces large kerf loss and surface roughness due to the high peak power. To address this challenge, we propose what we believe to be a novel multi-focal laser slicing method for efficient slicing of 4H-SiC enabled by an aberration-free non-iteration hologram generation method. Numerical simulations demonstrate high uniformity in multi-focal distribution, which contributes to reducing longitudinal damage. Furthermore, the effects of varying focal points and focal gaps conditions on the internal modification during laser slicing are experimentally investigated. After separation, the interface morphology, surface roughness, element distribution, and Raman spectroscopy are characterized. Experimental results demonstrate optimal slicing performance under 4-focal conditions with a 20 µm focal gap, yielding a wafer separation strength from 24.8 MPa in single focus to 7.6 MPa by 4-focal method and a total surface height variation of 10.7 µm. Furthermore, a 6-inch 4H-SiC ingot is sliced to validate its potential of industrial use. This method not only enhances the potential of hard brittle material slicing but also has broader application in laser microfabrication, 3D printing and waveguide fabricating.
23
Femtosecond filamentation in transparent media
A. Couairon, A. Mysyrowicz · Physics Reports · 2007 · 2.8K citations
Laser-induced phase separation of silicon carbide
Insung Choi, Hu Young Jeong, Hyeyoung Shin et al. · Nature Communications · 2016 · 124 citations · Full text