Selective Metallization on Ordinary Polymer Substrates by Laser Direct Activation of Copper Phosphate or Nickel Phosphate

Huiqing Xiang, Jiankun Nie, Zhicheng Zhou, Yang Yang, Zihao Yu, Jianguo Liu

Langmuir · 2023 · 18 citations · 36 references

Concepts

Abstract

In recent years, selective metallization on polymer surfaces has attracted considerable attention due to its excellent properties and wide applications. This paper reports that copper phosphate (Cu 3 (PO 4 ) 2 ) or nickel phosphate (Ni 3 (PO 4 ) 2 ) was selected as laser-active material to successfully fabricate metallic patterns on ordinary polymer substrates by laser direct activation and electroless plating. Scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) were utilized to characterize the interaction mechanism between a nanosecond-pulsed laser (355 and 1064 nm wavelengths) and Cu 3 (PO 4 ) 2 or Ni 3 (PO 4 ) 2 . It was found that after 355 or 1064 nm laser activation with appropriate parameters, Cu + was generated from Cu 3 (PO 4 ) 2, and NiO was generated from Ni 3 (PO 4 ) 2 . At the same time, Cu + or NiO adsorbed on the porous sponge-like microstructure of modified polycarbonate (PC), respectively, and acted as catalytic active centers to realize selective copper deposition in the laser-activated zone. Furthermore, the obtained copper layers were confirmed to possess good selectivity, electrical conductivity, and high adhesion strength (the highest grade of 5B). Moreover, from comparisons of Cu 3 (PO 4 ) 2 with Ni 3 (PO 4 ) 2 and of 355 nm laser activation with 1064 nm laser activation, the 1064 nm laser activation of Cu 3 (PO 4 ) 2 produced the most catalytic seeds (Cu + ) and had the best catalytic effect.

References

36