IEEE Transactions on Instrumentation and Measurement · 2022 · 17 citations · 31 references
EngineeringSystems EngineeringGeodesyGlobal Navigation Satellite SystemsMetrologyAttitude DeterminationGnss Reference FramesCarrier Phase MeasurementCarrier Phase PositioningGlobal Navigation Satellite Systems (Gnss)Inertial MemsInertial NavigationInertial Navigation SystemsTrajectory MatchingTrajectory Similarity Measurement
For a micro-electromechanical system (MEMS)-based inertial navigation system (INS) and global navigation satellite system (GNSS) integrated system in land vehicular applications, rapid and accurate initial heading alignment is still a challenge. We propose an initial heading alignment method for MEMS INS using the GNSS carrier-phase measurement, based on the basic principle of trajectory similarity. The proposed method performs “trajectory matching” in the line-of-sight direction of satellites, where the angle is obtained by comparing the actual observed time-differenced carrier phase (TDCP) and INS-derived TDCP. Experimental results show that the initial heading could be determined accurate to 0.65° and 1.68° at a 95% confidence level within 5 s under open sky conditions and in typical urban environments, respectively, using a typical MEMS inertial measurement unit (e.g., STIM300, Safran Sensing Technologies Norway) and high-quality GNSS receiver (NovAtel OEM6). The proposed method is also verified using low-cost GNSS receivers and low-cost IMU chip under different environment. The proposed method performs better than existing approaches in terms of both time efficiency and accuracy.
31
Adaptively robust filtering for kinematic geodetic positioning
Yuanxi Yang, H. He, Guochang Xu · Journal of Geodesy · 2001 · 385 citations