IEEE Transactions on Circuits & Systems II Express Briefs · 2022 · 12 citations · 12 references
EngineeringComputer EngineeringElectrical EngineeringDigital CommunicationMicroelectronicsSemiconductor DevicesClock ManagementCmos Circuit DesignDetector TechnologyDigital Signal ProcessingMixed-signal Integrated Circuit DesignReceiver SystemsAmplitude ModulationClock Data RecoveryGainJitterJitter ControlJitter TolerancePulse ModulationReceiver Design
This brief presents a programmable phase detector (PD) for the Baud-rate clock and data recovery (CDR) in four-level pulse amplitude modulation (PAM-4) quarter-rate receiver, using a transition weighted gain (TWG) technique. By assigning a different gain to the phase detection for each data-level transition, the TWG-based CDR (TWG-CDR) achieves stable operation of the CDR and jitter tracking. An optimal phase detection transfer characteristic is obtained by assigning the highest weight on the 1-level data transition and the lowest on the 3-level transition. The proposed CDR fabricated in 40 nm CMOS technology performs at 64-Gb/s in PAM-4. The measured jitter tolerance (JTOL) shows that the TWG-CDR improves the horizontal eye opening margin compared to the sign-sign Mueller-Müller CDR. The TWG-CDR tested around a 6dB loss channel achieves a BER less than 10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">−11</sup> and energy efficiency of 2.37 pJ/b.
12
Ashkan Roshan-Zamir, Takayuki Iwai, Yang-Hang Fan et al. · IEEE Journal of Solid-State Circuits · 2018 · 72 citations
A 4.9pJ/b 16-to-64Gb/s PAM-4 VSR transceiver in 28nm FDSOI CMOS
Emanuele Depaoli, Enrico Monaco, Giovanni Steffan et al. · 2018 · 43 citations