Micromachines · 2022 · 83 citations · 27 references
Natural SciencesMaterials EngineeringMaterials ScienceCeramic MaterialsElectronic MaterialsSemiconductor MaterialsPerovskite MaterialsSurface PhysicsNon-volatile Ferroelectric MemoryNonvolatile Memory DevicesNonvolatile Memory MaterialsPerovskite FerroelectricsPolarizationPolarization HysteresisPolarization-electric Field HysteresisThin Film Ferroelectrics
Currently, there is a lack of nonvolatile memory (NVM) technology that can operate continuously at temperatures > 200 °C. While ferroelectric NVM has previously demonstrated long polarization retention and >1013 read/write cycles at room temperature, the largest hurdle comes at higher temperatures for conventional perovskite ferroelectrics. Here, we demonstrate how AlScN can enable high-temperature (>200 °C) nonvolatile memory. The c-axis textured thin films were prepared via reactive radiofrequency magnetron sputtering onto a highly textured Pt (111) surface. Photolithographically defined Pt top electrodes completed the capacitor stack, which was tested in a high temperature vacuum probe station up to 400 °C. Polarization−electric field hysteresis loops between 23 and 400 °C reveal minimal changes in the remanent polarization values, while the coercive field decreased from 4.3 MV/cm to 2.6 MV/cm. Even at 400 °C, the polarization retention exhibited negligible loss for up to 1000 s, demonstrating promise for potential nonvolatile memory capable of high−temperature operation. Fatigue behavior also showed a moderate dependence on operating temperature, but the mechanisms of degradation require additional study.
27
H.‐S. Philip Wong, Simone Raoux, Sang‐Bum Kim et al. · Proceedings of the IEEE · 2010 · 1.8K citations
AlScN: A III-V semiconductor based ferroelectric
Simon Fichtner, Niklas Wolff, Fabian Lofink et al. · Journal of Applied Physics · 2019 · 790 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +17