Drop breakage in a single‐pass through vortex‐based cavitation device: Experiments and modeling

Abstract

Abstract Liquid–liquid emulsions are used in many sectors such as personal care, home care, and food products. There is an increasing need for developing compact and modular devices for producing emulsions with desired droplet size distribution (DSD). In this work, we have experimentally and computationally investigated an application of vortex‐based hydrodynamic cavitation (HC) device for producing emulsions. The focus is on understanding drop breakage occurring in a single‐pass through the considered HC device. The experiments were performed for generating oil‐in‐water emulsion containing 1%–20% rapeseed oil. The effect of pressure drop across the HC device in the range of 50–250 kPa on drop breakage was examined. DSD of emulsions produced through a single pass was measured using the focussed beam reflectance measurements. Comprehensive computational fluid dynamics (CFD) model based on the Eulerian approach was developed to simulate multiphase cavitating flow. Using the simulated flow, population balance model (PBM) with appropriate breakage kernels was solved to simulate droplet breakage in a vortex‐based HC device. The device showed an excellent drop breakage efficiency (nearly 1% which is much higher than other commercial devices such as rotor–stators or sonolators) and was able to reduce mean drop size from 66 to ~15 μm in a single pass. The CFD and PBM models were able to simulate DSD. The presented models and results will be useful for researchers and engineers interested in developing compact devices for producing emulsions of desired DSD.