Color-tunable <b>&amp;lt;</b>10 <i> <b>μ</b> </i>m square InGaN micro-LEDs on compliant GaN-on-porous-GaN pseudo-substrates

Abstract

In this study, two methods to tune the emission wavelength of micro-LEDs fabricated on tile patterned compliant GaN-on-porous-GaN pseudo-substrates (PSs) are presented. The mechanical flexibility of porous GaN was utilized to relax the strain induced during the growth of light-emitting diode (LED) structures with n- and p-InGaN layers and enhance the indium incorporation via the composition pulling effect. The first approach involved only varying the size of the PS square tiles used for LED structure regrowth, from 20 × 20 μm2 to 8 × 8 μm2. Higher n-InGaN base layer relaxation with decreasing tile size resulted in a red shift of emission from 525 nm to 561 nm with no change in the growth conditions. The second method involved changing the mole fraction, x, of the n-InxGa1−xN base layer of the LED structure from 0.04 to 0.09 by reducing growth temperature, while maintaining the high temperature growth conditions of the multi-quantum well (MQW) and p-InGaN targeting 530 nm emission. The resulting wavelength shift was a remarkable 536–616 nm due to the stronger composition pulling effect, providing a pathway to enable high indium content MQW active regions to be grown at high temperature.