Micromachines · 2020 · 12 citations · 45 references
EngineeringManufacturing EngineeringMechanical EngineeringMetallurgyMicrofabricationProduction EngineeringMachiningMicrofabrication ProcessesMicromachiningElectrode WearMachining Feature ModelingMaterial Removal ModelingMaterial Removal SimulationMicro-electro-discharge MachiningMicromixer DesignMillingMilling Process Modeling
In this paper, development of a technical model of micro Electrical Discharge Machining in milling configuration (EDM milling) is presented. The input to the model is a parametrically presented feature geometry and the output is a feature machining time. To model key factors influencing feature machining time, an experimental campaign by machining various microgrooves into corrosive resistant steel was executed. The following parameters were investigated: electrode dressing time, material removal rate, electrode wear, electrode wear control time and machining strategy. The technology data and knowledge base were constructed using data obtained experimentally. The model is applicable for groove-like features, commonly applied in bottom grooved micromixers (BGMs), with widths from 40 to 120 µm and depths up to 100 µm. The optimization of a BGM geometry is presented as a case study of the model usage. The mixing performances of various micromixer designs, compliant with micro EDM milling technology, were evaluated using computational fluid dynamics modelling. The results show that slanted groove micromixer is a favourable design to be implemented when micro EDM milling technology is applied. The presented technical model provides an efficient design optimization tool and, thus, aims to be used by a microfluidic design engineer.
45
Chaotic Mixer for Microchannels
Abraham D. Stroock, Stephan K. W. Dertinger, Armand Ajdari et al. · Science · 2002 · 3.4K citations
State of the Art of Micromachining
T. Masuzawa · CIRP Annals · 2000 · 918 citations
Engineering, Manufacturing Engineering, Mechanical Engineering +10
Advancing EDM through Fundamental Insight into the Process
Masanori Kunieda, Bert Lauwers, K. P. Rajurkar et al. · CIRP Annals · 2005 · 897 citations
Leo Alting, F. Kimura, Hans Nørgaard Hansen et al. · CIRP Annals · 2003 · 347 citations