Polymers · 2019 · 66 citations · 35 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsPolymer EngineeringThermal AnalysisAdhesive BondingPolysaccharide PropertiesThermal ProcessingThermal Properties Of MaterialsThermosetsHot PressingPlywoodPolymer Thermal DegradationPressing ConditionsPressing TemperaturePressing TimePyrolysis Gas Chromatography Mass SpectrometryThermal Degradation Studies
In previous research, sucrose and citric acid were used to synthesize an eco-friendly plywood adhesive. Herein, further research was performed to determine the optimal hot-pressing conditions and curing behavior of a sucrose-citric acid (SC) adhesive. The results of dry and wet shear strength measurements showed that the optimal hot-pressing temperature, hot-pressing time, and spread rate of plywood samples bonded by the SC adhesive were 190 °C, 7 min, and 140 g/m2, respectively. When plywood was bonded at the optimal hot-pressing conditions, the wet shear strength met the requirements of the China National Standard GB/T 9846-2015. Thermal analysis showed that the thermal degradation and endothermic reaction temperatures of the SC 25/75 adhesive were lower than either sucrose or citric acid individually. In addition, the insoluble mass proportion increased with the heating temperature and time. The Pyrolysis Gas Chromatography and Mass Spectrometr (Py-GC/MS) analysis confirmed that the SC adhesive was cured by the reaction between furan compounds, saccharide, and citric acid, and the resulting polymer appeared to be joined by ether linkages.
35
Caoxing Huang, Wenqian Lin, Chenhuan Lai et al. · Bioresource Technology · 2019 · 266 citations
Agriculture, Agricultural Biotechnology, Agricultural Engineering +14
Thermal decomposition of citric acid
Mahmood M. Barbooti, Dhoaib Al‐Sammerrai · Thermochimica Acta · 1986 · 227 citations