Air Jet Impingement Cooling of Electronic Devices Using Additively Manufactured Nozzles

Beomjin Kwon, Thomas Foulkes, Tianyu Yang, Nenad Miljkovic, William P. King

IEEE Transactions on Components Packaging and Manufacturing Technology · 2019 · 84 citations · 40 references

DOIFull text

Open access

Concepts

Abstract

This article reports the design, fabrication, and demonstration of additively manufactured air jet impingement coolers for the thermal management of high-power gallium nitride (GaN) transistors. The polymer jet coolers impinge high-speed airflow with a velocity of 42-195 m/s (Reynolds number between 1.87×104 and 8.77×10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">4</sup> ) onto working GaN devices mounted on a printed circuit board (PCB). The air jet provides cooling heat fluxes of up to 58.4 W/cm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> , cooling rates of up to 6.6 °C/s, and convective heat transfer coefficient ranging from 5.2 to 17.0 kW/(m <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> ·K). The cooling performance is comparable to that of jet coolers made from other materials and manufacturing technologies. A key benefit of additive manufacturing (AM) is design freedom and geometric complexity, which we highlight by demonstrating three different packaging configurations, each enabled by a different jet cooler design that is customized for different types of packaging configurations: Cooler 1 directs two parallel impinging jets onto the top side of two devices; cooler 2 directs two air jets onto the front side and two air jets onto the back side of two devices; and cooler 3 directs air jets onto the front side of four devices mounted on parallel adjacent circuit boards. The second benefit of AM is the ability to consolidate multiple components into a single part, which we highlight by combining a nozzle, a fluidic delivery system, and a flow distributor within a volume of 80 mm × 80 mm × 100 mm. This work demonstrates the potential of AM to create complex, lightweight, fluidic delivery systems to achieve thermally and hydrodynamically optimized air jet cooling for high-power-density electronic devices.

References

40